Lone Star Bowhunters Association - View Single Post

LostHawg · 06-05-2007, 08:50 AM

With spray on spar urethane, apply a coat then sand with steel wool. Use the satin or semi-gloss finish. Four coats should do it. Sand with 0000 steel wool.

Have you tried tru oil?

06-05-2007, 08:50 AM	#14
LostHawg Senior Member Join Date: Aug 2003 LSBA Region: 76 Location: San Angelo Posts: 1,903 Points: 4145.00	With spray on spar urethane, apply a coat then sand with steel wool. Use the satin or semi-gloss finish. Four coats should do it. Sand with 0000 steel wool. Have you tried tru oil?